Huaian Salt Cavern Compressed Air Energy Storage Compressor Unit Selected for National First-of-Its-Kind Equipment List
Huaian Salt Cavern Compressed Air Energy Storage Compressor Unit Selected for National First-of-Its-Kind Equipment List
The National Energy Administration's sixth batch of the list of major technical equipment that is first-of-its-kind in the energy field has been announced, and the "intelligent adjustable ultra-high-temperature exhaust high-pressure-ratio compressor unit for 300 MW-class compressed air energy storage systems" applied in the Huaian Salt Cavern Compressed Air Energy Storage Power Generation Project has been selected. Among the 90 items of equipment in this batch, there are only 2 in the compressed air energy storage category, and this 300 MW-class large-scale compressed air energy storage core unit is the only one of its kind nationwide.
The Huaian project relies on underground salt caverns at a depth of 1,350 meters to build two sets of 300 MW-class non-supplementary-fired compressed air energy storage units, with a gas storage pressure of 17 MPa and a heat storage temperature of 360°C. Unit 1 was connected to the grid in July 2025 and achieved full-load operation in December of the same year, while Unit 2 was successfully connected to the grid on its first attempt in January 2026. During the summer peak period, Unit 2 completed 68 full charge-discharge cycles. The unit was jointly developed by Shenyang Turbomachinery Co., Ltd., State Grid Jiangsu Electric Power Co., Ltd., and others, with core indicators covering flow rate, efficiency, and wide-condition adaptability.
The threshold for first-of-its-kind recognition lies in "being the first in the country to achieve a major technological breakthrough and not yet having obtained market performance at batch scale." The role of the compressor in this project is not that of general-purpose equipment, but that of core rotating equipment that determines system efficiency and reliability. Compressor units for compressed air energy storage need to maintain high efficiency across a wide load range while withstanding the mechanical and thermal stress challenges brought by frequent start-stop cycles and long-term operation. The combined working conditions of salt cavern gas storage pressure and heat storage temperature impose higher requirements on the unit's regulation precision. This selection reflects that the compressor unit has completed a full closed loop from design verification to engineering operation in a 300 MW-class compressed air energy storage scenario, and the equipment selection and delivery pace of similar projects in the future can refer to this engineering sample.
