Kobelco Takes 70th Anniversary of Oil-Free Screw as Axis to Exhibit "Compressed Air + Hot Water + Chilled Water" Tri-Generation Chain

November 5, 2026

Kobelco Takes 70th Anniversary of Oil-Free Screw as Axis to Exhibit "Compressed Air + Hot Water + Chilled Water" Tri-Generation Chain

2026 marks the 70th anniversary of Kobelco's oil-free screw compressor—in 1956, Kobelco produced Japan's first oil-free screw compressor. On the first day of ComVac ASIA 2026, Kobelco did not turn its booth into a display of single-machine parameters; instead, taking "integrated energy utilization solutions" as its main thread, it linked oil-free compressors, post-treatment, and waste heat recovery systems into a complete energy cascade utilization chain, simultaneously delivering three types of energy to customers: compressed air, hot water, and chilled water.

The starting point of the chain is the Emeraude-ALE dry oil-free screw compressor, which is certified to ISO 8573-1 Class 0. Its new rotor profile, combined with a high-efficiency IPM motor, maintains a power specific ratio advantage in high-cleanliness scenarios such as food, pharmaceuticals, and electronics. The heat generated during compression is not discharged as waste heat but is recovered and used in stages.

The first stage is the ED series rotary desiccant dryer. Traditional adsorption dryers require additional electricity or consume finished compressed air to regenerate the desiccant, whereas the ED series directly uses the compressor's own exhaust heat to complete rotor regeneration, achieving a dew point as low as -40°C with its own power consumption at only about 25 W. The second stage is the TR series hot water recovery unit, which extracts heat from the cooling circuit and outputs hot water at up to 90°C. A built-in temperature control valve can adjust the outlet water temperature, and only the cooling water circuit is modified, without affecting the main unit's air path or operating efficiency. The third stage is a lithium bromide absorption chiller, which uses the remaining compression waste heat as a driving source to produce chilled water, with its own power consumption at only about 1 kW.

The ED handles gas drying, the TR produces hot water, and the chiller supplies cooling capacity; the three work in concert to extract and fully utilize the compression heat. At this 70th anniversary milestone, what Kobelco really wants to say is not how much electricity a single machine saves, but that the role of the compressor in the factory is changing from "air-producing equipment" to a dispatchable small-scale energy station.