Baosi Shares Obtains Patent for Fully Enclosed Screw Compressor

November 11, 2026

Baosi Shares Obtains Patent for Fully Enclosed Screw Compressor

Recently, Baosi Shares newly obtained a utility model patent authorization titled "A Fully Enclosed Screw Compressor," with the authorization announcement date being November 10, 2026. According to the patent abstract, the design installs the motor and the compression assembly together inside the tank body, with a suction inlet provided at the end of the casing facing the motor, and a discharge port provided at the end of the screw assembly away from the motor. The discharge port is located below the outlet, and an oil-gas separator is integrated at the discharge port, filtering the discharged gas through the cylinder and an external filter.

The engineering orientation of the fully enclosed structure is relatively clear: the motor and compressor are enclosed in the same container, physically reducing shaft seal leakage points while also reducing the paths through which operating noise is transmitted outward. Arranging the oil-gas separator directly at the discharge port moves the post-treatment stage forward into the interior of the main unit, reducing external pipeline connections and the complexity of gas flow within the tank body. The patent abstract states this as "reducing the complexity of gas flow within the tank body and reducing the generation of gas resistance." Combined, the two designs improve the flow-path efficiency of gas from intake to discharge, rather than any single performance indicator.

Baosi Shares takes screw compressor main units and complete machines as its main business, with compressor products and related business being its largest source of revenue. In the first half of 2026, revenue from this segment was 502 million yuan, accounting for 56.84% of main business revenue. Screw compressor main units had previously been rated as a national manufacturing single-item champion product, and the technical accumulation at the main unit level is the engineering foundation that enables the landing of fully enclosed complete-machine designs. This patent focuses on local optimization of the flow path and separation structure inside the tank body, which is a conventional path for main unit manufacturers to continuously carry out engineering iteration at the core component level. The pace of actual application in the fully enclosed product line in the future is worth tracking.